content loaded
LIBERTY LE71A2 Image 1

LIBERTY LE71A2 SEWAGE PUMP SUBMERSIBLE 3/4HP 115V 10FT CORD

MFR Part #: LE71A2
SKU #: 1061984
Brand: Liberty Pumps®
UPC: 671812101737
Liberty Pumps® LE71A2 LE70, 3/4 hp, 115 VAC, 2 in Flanged Outlet, Cast Iron, 12 A Full Load/29.1 A Locked Rotor, 1 Phase
3 Years Limited
cCSAus Certified | SSPMA Certified | PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Notice something off about this product?

Liberty Pumps®, LE71A2, Automatic, Series: LE70, 160 gpm Flow Rate, 2 in Flanged Outlet, 28 ft Maximum Head, 3/4 hp, 115 VAC, 12 A Full Load/29.1 A Locked Rotor, 60 Hz Frequency, 1 ph, 1725 rpm Motor, SJTW 10 ft Cord, Cast Iron 2-Vane Semi-Open Impeller, Rail System Mounting, 221 deg F Thermal Overload, Ball Bearing, Cast Iron, 12.5 in W x 18.9 in H Dimensions

Liberty's LE70 series is a 3/4 hp sewage pump with 2 in solids-handling capability. Constructed of heavy cast iron with a tough epoxy powder coat finish, stainless steel fasteners and rotor shaft, the LE70 is designed for durability. Its quick-disconnect cord design allows for easy interchange of power cords in 10, 25 and 35 ft L.

Product Details

Liberty Pumps®, LE71A2, Automatic, Series: LE70, 160 gpm Flow Rate, 2 in Flanged Outlet, 28 ft Maximum Head, 3/4 hp, 115 VAC, 12 A Full Load/29.1 A Locked Rotor, 60 Hz Frequency, 1 ph, 1725 rpm Motor, SJTW 10 ft Cord, Cast Iron 2-Vane Semi-Open Impeller, Rail System Mounting, 221 deg F Thermal Overload, Ball Bearing, Cast Iron, 12.5 in W x 18.9 in H Dimensions

Liberty's LE70 series is a 3/4 hp sewage pump with 2 in solids-handling capability. Constructed of heavy cast iron with a tough epoxy powder coat finish, stainless steel fasteners and rotor shaft, the LE70 is designed for durability. Its quick-disconnect cord design allows for easy interchange of power cords in 10, 25 and 35 ft L.

Attributes

Country Of Origin: US
Horsepower: 3/4 hp
Maximum Head: 28 ft
Outlet Size: 2 in Flanged
Type: Automatic
Voltage Rating: 115 VAC
Amperage Rating: 12 A Full Load/29.1 A Locked Rotor
Bearing Type: Ball
Cord Type: SJTW 10 ft
Dimensions: 12.5 in W x 18.9 in H
Flow Rate: 160 gpm
Frequency Rating: 60 Hz
Impeller Type: Cast Iron 2-Vane Semi-Open
Material: Cast Iron
Motor Speed: 1725 rpm
Mounting Type: Rail System
Phase: 1 ph, 1
Series: LE70
Temperature Rating: 221 deg F Thermal Overload

Features

  • Cast iron housings and volute
  • 416 stainless steel rotor shaft
  • Oil-filled, hermetically sealed motor
  • Permanently lubricated upper and lower ball bearings
  • Unitized shaft seals
  • Adjustable pumping range
  • Quick-connect 10 in power cord

Resources

Instruction/Installation Manual
Specification Sheet