content loaded
LIBERTY FL202A-2 Image 1

LIBERTY FL202A-2 SUBMERSIBLE EFFLUENT PUMP 2HP 25FT CORD 208-230V AUTO

MFR Part #: FL202A-2
SKU #: 1154484
Brand: Liberty Pumps®
UPC: 671812131550
Liberty Pumps® FL202A-2 FL200, 102 gpm Max Flow, 10 ft Rated Head, Automatic, 130 ft Max Head, 208 to 230 VAC, 1 Phase
3 Years Limited
Step Systems, Mound Systems, Liquid Waste Transfer and Higher Head Dewatering Applications
cCSAus Certified | SSPMA Certified | PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Notice something off about this product?

Liberty Pumps®, FL202A-2, High-Head, Series: FL200, 102 gpm Maximum, 10 ft Rated Head, Automatic/Non Automatic: Automatic, 1-1/2 in, 2 in FNPT Outlet, 130 ft Maximum Head, 2 hp, 208 to 230 VAC, 15 A Full Load/53 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJOOW 25 ft Cord, 1 Service Factor, Cast Iron 3-Vane Semi-Open Impeller, Flange Mounting, 135 deg C Thermal Overload, NEMA 4X Enclosure, Ball/Race Bearing, Cast Iron, 11-3/4 in W x 18-1/4 in H Dimensions

The FL200 series by Liberty is a 2 hp effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. The pump features a dual-sized threaded discharge of 1-1/2 and 2 in for connection to either size pipe. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL200 series will provide years of reliable performance.

Product Details

Liberty Pumps®, FL202A-2, High-Head, Series: FL200, 102 gpm Maximum, 10 ft Rated Head, Automatic/Non Automatic: Automatic, 1-1/2 in, 2 in FNPT Outlet, 130 ft Maximum Head, 2 hp, 208 to 230 VAC, 15 A Full Load/53 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJOOW 25 ft Cord, 1 Service Factor, Cast Iron 3-Vane Semi-Open Impeller, Flange Mounting, 135 deg C Thermal Overload, NEMA 4X Enclosure, Ball/Race Bearing, Cast Iron, 11-3/4 in W x 18-1/4 in H Dimensions

The FL200 series by Liberty is a 2 hp effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. The pump features a dual-sized threaded discharge of 1-1/2 and 2 in for connection to either size pipe. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the FL200 series will provide years of reliable performance.

Attributes

Country Of Origin: US
Horsepower: 2 hp
Maximum Flow Rate: 102 gpm
Maximum Head: 130 ft
Outlet Size: 1-1/2 in, 2 in FNPT
Amperage Rating: 15 A Full Load/53 A Locked Rotor
Automatic/Non Automatic: Automatic
Bearing Type: Ball/Race
Cord Type: SJOOW 25 ft
Dimensions: 11-3/4 in W x 18-1/4 in H
Enclosure Type: NEMA 4X
Frequency Rating: 60 Hz
Impeller Type: Cast Iron 3-Vane Semi-Open
Material: Cast Iron
Motor Speed: 3450 rpm
Mounting Type: Flange
Phase: 1 ph, 1
Rated Head: 10 ft
Series: FL200
Service Factor: 1
Temperature Rating: 135 deg C Thermal Overload
Type: High-Head
Voltage Rating: 208 to 230 VAC

Features

  • Heavy cast iron construction
  • Stainless steel rotor shaft
  • Dual shaft seals
  • Single float, mercury free level control
  • Additional pipe mounting clamp
  • Fully adjustable pumping range
  • Quick-connect 25 in power cord

Resources

Instruction/Installation Manual
Specification Sheet