Thank you for visiting Bartle & Gibson. If you encounter any issues or have feedback to share, please email us at [email protected]. Your input is greatly appreciated!
content loaded
OATEY PR250-C MASTERS PRIMER-PRO CLEAR PRIMER 237ML
MFR Part #: PR250-C
SKU #: 1239919
Brand: Oatey | MASTERS®
UPC: 67001022493
Please note this item is discontinued (order fulfillment will depend on stock availability): MASTERS® PR250-C Primer, For Use With PVC and CPVC pipe and fittings, Clear, 237 mL Container
Areas where plumbing code calls for verification that a primer be used
ASTM F656 | NSF14 for PW, DWV and Sewer | IAPMO Listed | Meets California SCAQMD 1171/M24 requirements | ANSI 61 health effects requirements | UL Greenguard Gold
Notice something off about this product?
Product Details
Attributes
Features
Resources
MASTERS®, PR250-C, Primer, 237 mL Container, For Use With: PVC and CPVC pipe and fittings, Clear
Boiling Point:66.1 deg C
Clearance Items:Clearance
Color:Clear
Composition:10 to 30% Tetrahydrofuran, 10 to 30% Methyl Ethyl Ketone, 15 to 40% Cyclohexanone, 30 to 60% Acetone
Container Size:237 mL
Evaporation Rate:5.5 to 8 %
Flash Point:-10 to -5 deg C
Form:Liquid
Net Content:237 mL
Series:Primer-PRO Series
Suitable For Use With:PVC and CPVC Pipe and Fittings
Temperature Rating:110 deg F
Vapor Density:2.5
Vapor Pressure:19.33 kPa
Viscosity:<116.279 cSt
VOC Content:484 g/L
- Removes surface dirt grease and grime as well as softens the pipe and surface to allow a fast secure solvent weld
- For use in areas where plumbing code calls for verification that a primer be used
- Cut pipe ends square chamfer and clean pipe ends
- Check dry-fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Apply thoroughly to the inside of the fitting socket
- Apply thoroughly to the outside surface of the pipe to the approximate depth of the fitting
- Apply a second coat to the fitting socket
- While primer is still wet use an appropriate solvent cement for the pipe and fitting being joined
Product Details
MASTERS®, PR250-C, Primer, 237 mL Container, For Use With: PVC and CPVC pipe and fittings, Clear
Attributes
Boiling Point: 66.1 deg C
Clearance Items: Clearance
Color: Clear
Composition: 10 to 30% Tetrahydrofuran, 10 to 30% Methyl Ethyl Ketone, 15 to 40% Cyclohexanone, 30 to 60% Acetone
Container Size: 237 mL
Evaporation Rate: 5.5 to 8 %
Flash Point: -10 to -5 deg C
Form: Liquid
Net Content: 237 mL
Series: Primer-PRO Series
Suitable For Use With: PVC and CPVC Pipe and Fittings
Temperature Rating: 110 deg F
Vapor Density: 2.5
Vapor Pressure: 19.33 kPa
Viscosity: <116.279 cSt
VOC Content: 484 g/L
Features
- Removes surface dirt grease and grime as well as softens the pipe and surface to allow a fast secure solvent weld
- For use in areas where plumbing code calls for verification that a primer be used
- Cut pipe ends square chamfer and clean pipe ends
- Check dry-fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Apply thoroughly to the inside of the fitting socket
- Apply thoroughly to the outside surface of the pipe to the approximate depth of the fitting
- Apply a second coat to the fitting socket
- While primer is still wet use an appropriate solvent cement for the pipe and fitting being joined