RIDGID 23712 K1500A SE 115V 60HZ W/C11
Notice something off about this product?
Product Details
Attributes
Features
Resources
RIDGID® Sectional Drain Cleaning Machine, 2 to 4 in Drain, 175 ft Maximum Run, 3/4 hp, 115 VAC, 10.4 A, 710 rpm, 16 in L x 20-3/4 in W x 41-1/2 in H
The RIDGID® K-75A/B, K-1500A/B & K-1500SP Drain Cleaning Machines are for cleaning 11/4w through 10w lines. These machines are driven by induction motors that have a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle or rotary switch provides FORWARD/OFF/REVERSE control of the motor. Machines are designed to use sectional-type cable that has a quick coupling system for disconnecting tools. The cable is manually fed in and out of the machine and rotates at a cable speed of 600 to 700 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. K-75 machines come equipped to run 7/8w cable to clean 2w - 4w lines through 175v. They can be adapted to use 5/8w cable to clean 11/4w to 3w lines. K-1500 machines come equipped to run 11/4w cable to clean 3w - 10w lines through 200v - the 1500SP through 300v. They can be easily adapted to use 7/8w cable to clean 2w - 4w lines.
- The finest all-around sewer and drain cleaning machine, one man can easily clean the heaviest blockages - Indoors or out, high-speed cleaning gets the job done faster and better
- Wheels to the job site - Sets up fast, cleans up fast
- Low profile "B" frame design will fit most crawl spaces, loads and unloads from truck easily, upright "A" frame features cable carrier storage during transport, ideal for in-house applications
- Equipped to run, easy to handle, 15 ft sections of 1-1/4 in cable to clean 3 to 8 in lines to 200 ft
- Easy clutch jaw change-out adapts K-1500 to run 15 ft sections of 7/8 in cable through 2 to 4 in lines up to 175 ft
- Equipped with 3/4 hp motor approved to CSA and UL standards (NRTLC)
- 115 V 60 Hz reversible motor
- For 2 to 8 in Drain and Sewer Lines
Product Details
RIDGID® Sectional Drain Cleaning Machine, 2 to 4 in Drain, 175 ft Maximum Run, 3/4 hp, 115 VAC, 10.4 A, 710 rpm, 16 in L x 20-3/4 in W x 41-1/2 in H
The RIDGID® K-75A/B, K-1500A/B & K-1500SP Drain Cleaning Machines are for cleaning 11/4w through 10w lines. These machines are driven by induction motors that have a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle or rotary switch provides FORWARD/OFF/REVERSE control of the motor. Machines are designed to use sectional-type cable that has a quick coupling system for disconnecting tools. The cable is manually fed in and out of the machine and rotates at a cable speed of 600 to 700 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. K-75 machines come equipped to run 7/8w cable to clean 2w - 4w lines through 175v. They can be adapted to use 5/8w cable to clean 11/4w to 3w lines. K-1500 machines come equipped to run 11/4w cable to clean 3w - 10w lines through 200v - the 1500SP through 300v. They can be easily adapted to use 7/8w cable to clean 2w - 4w lines.
Attributes
Features
- The finest all-around sewer and drain cleaning machine, one man can easily clean the heaviest blockages - Indoors or out, high-speed cleaning gets the job done faster and better
- Wheels to the job site - Sets up fast, cleans up fast
- Low profile "B" frame design will fit most crawl spaces, loads and unloads from truck easily, upright "A" frame features cable carrier storage during transport, ideal for in-house applications
- Equipped to run, easy to handle, 15 ft sections of 1-1/4 in cable to clean 3 to 8 in lines to 200 ft
- Easy clutch jaw change-out adapts K-1500 to run 15 ft sections of 7/8 in cable through 2 to 4 in lines up to 175 ft
- Equipped with 3/4 hp motor approved to CSA and UL standards (NRTLC)
- 115 V 60 Hz reversible motor
- For 2 to 8 in Drain and Sewer Lines